|
Place of Origin | China |
Brand Name | CNKHONG |
Model Number | KH-UF-8040W |
UF Membrane for Water Purification of Electroplating with Pore Size 0.03um PVDF material
Generally, Ultrafiltration (UF) is a separation process using membranes with pore sizes in the range of 0.1 to 0.001 micron. UF membranes are able to remove high molecular-weight substances, colloidal materials, and organic and inorganic polymeric molecules. On the contrary, low molecular-weight organics and ions such as sodium, calcium, and sulfate won’t be removed by UF Membranes.
Among all types of Ultrafiltration, Hollow Fiber (with pore size of 0.1 micron) is commonly known for its use in drinking water purification since it’s utility to separate suspended solids, colloids and bacteria from tap water by using physical barrier. Specifically, Hollow Fiber is small tube-like filters and its end are sealed in order to collect purified water from cartridge.
Besides, due to Hollow Fiber has tremendous amount of surface area with high permeability a small volume. In this way, it can provide higher purified flux and requires low working pressure. To sum up, Hollow Fiber Ultrafiltration technology offers an economic method to get the microbiologically safe water in daily life.
Size and weight
|
Model | KH-UF-8040W-PVDF | KH-UF-8060W-PVDF |
Module Diameter ( A, mm) | Φ200 mm | Φ200 mm | |
Module Length ( B, mm) | 1220 mm | 1640 mm | |
Module Length (C, mm) | 1365 mm | 1785 mm | |
Size of Inlet/Outlet | DN50 | DN50 | |
Operating Type | Outside to Inside | Outside to Inside | |
Membrane Area | 30 m2 | 45 m2 | |
Dry weight of the module | 20 Kg | 35 Kg | |
Parameters |
Shell material | UPVC | UPVC |
Membrane Material | PVDF | PVDF | |
Membrane pore size | 0.03μm | 0.03μm | |
Inner diameter of the hollow fiber | 0.7 mm | 0.7 mm | |
Outer diameter of the hollow fiber | 1.3mm | 1.3mm | |
Turbidity of Permeating water | ≤ 0.2NTU | ≤ 0.2 NTU | |
SDI value of permeating water
|
≤ 3 | ≤ 3 | |
Flux rate for of purified water (0.10MP,20℃) |
≥ 3600L/H | ≥ 5400L/H | |
Typical Process
|
Temperature Range | 5-45 ℃ | 5-45 ℃ |
PH Value Range | 2-13 | 2-13 | |
Permeating Flux rate for different Water |
40 - 80 l/m2/hr | 40 -80 l/m2/hr | |
Operating Pressure | ≤0.12 MPa | ≤0.12MPa | |
Maximum Inlet Pressure | 0.2 MPa | 0.2MPa | |
Backwashing flux rate |
1.5-2.0 times of Permeating Flux |
1.5-2.0 times of Permeating Flux |
|
Backwashing times | Once per 30-120 minutes | Once per 30-120 minutes | |
Chemical cleaning online during backwashing | Once per 7-14 days | Once per 7-14 days |
The whole installation and application process of our MBR modules are described as the following photo:
Contact Us at Any Time