Home
>
Products
>
MBR Filter Membrane
>
|
|
| Place of Origin | China |
| Brand Name | CNKHONG |
| Model Number | KH-MBR-6-Co-PVDF |
Submerged MBR Membrane Modules for Wastewater Treatment with PVDF material
8M2 MBR Membrane Elements for Wastewater Treatment with PVDF material
MBR (Membrane Biological Reactor), is a new waste water treatment equipment combining advantages of UF system and biological reactor. Activated sludge and microorganism in it will absorb and resolve organic pollutant in waste water, leave pure water. UF membrane is to separate water and mud, can replace second setting pond. Meanwhile, membrane keeps activated sludge microorganism in biological reactor for long time, make a high biological concentration which means high oxygenation efficiency of microorganism to organics.
Applications:
It can be used for municipal sewage and industrial waste water treatment and substitute for secondary sedimentation tank in removing suspended particles, so as to increase nitrogen removal rate and organics degradation rate.
Youber hollow fiber MBR membrane module can be widely used in various waste water processes with high BOD and suspended solids content, including the following:
1)Municipal drainage treatment
2)Industrial waste water treatment, including chemical and food processing waste water etc.
3)Waste water treatment in aquaculture plants
4)Waste Penetration Treatment
5)Treatment and reuse of pharmaceutical waste water
3. Technical Parameter of Membrane Module
| Item/Model | KH-MBR-6-CO-PVDF | KH-MBR-12-CO-PVDF | KH-MBR-15-CO-PVDF |
| Membrane Area(M2) | 8 | 12 | 15 |
| Height | 1050 mm | 1550 mm | 1550 mm |
| Width | 645 mm | 645mm | 645 mm |
| Thickness | 47 mm | 47mm | 47mm |
| Dry Weight | 6kgs | 10kgs | 15 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium hypochlorite | 500-3000ppm Sodium hypochlorite |
500-3000ppm Sodium hypochlorite |
| Item/Model | KH-MBR-25-CO-PVDF | KH-MBR-30-CO-PVDF | KH-MBR-35-CO-PVDF |
| Membrane Area(M2) | 25 | 30 | 35 |
| Height | 1560 mm | 1810 mm | 1810 mm |
| Width | 1040 mm | 1040 mm | 1250 mm |
| Thickness | 47 mm | 47mm | 35 mm |
| Dry Weight | 20 kgs | 25 kgs | 30 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium hypochlorite |
2. Typical parameters of MBR units.
4.. Structure of Membrane Modules and Frames:
A. Structure of MBR Modules
B.Structure of MBR Frames
5. Product Features
-- All the frames are made of SS 304 or SS 316 stainess steel with reliable frames.
-- Every modules can be pulled out or putted in very conveniently for they are installed into UPVC Groove from top to bottom.
-- Every modules have flexible tubes connecting to collecting pipes.
-- Every modules have independent air blowing tube. There are additional air-blowing tube at the bottom of the frames.
-- All the modules have an added patented design air blowing tube to enhance the efficiency of the air blowing onto the membrane surface.
-- Permanent Hydrobility Membrane
-- Strong strength, the broken strength more than 50MPa
6. Application of MBR Units:
The whole installation and application process of our MBR modules are described as the following photo:
A. MBR unit of KH-MBRMD-15×28-CO-PVDF with total membrane area of 420 m2/unit.
Why Choose US?
1). Over 20 years experience in UF and MBR membrane
2). Excellent cooperation partner
3). Own an excellent technical team
4). Advanced R & D capability
5). International management system(ISO9001)
6). Located in Jiangsu, convenient for export transportation.
Our Service
1). MBR membrane technical consulting,
2). MBR membrane application engineering design,
3). MBR system manufacturing, installation and commissioning,
4). Different membrane dimension, material like PP, PVDF etc.,can be customize according to your requirements
5). 12 months warranty
Contact Us at Any Time
