|
|
| Place of Origin | China |
| Brand Name | CNKHONG |
| Model Number | KH-UF-SFX2880 |
Reinforced Ultrafiltration(UF) for River Water Purification with 0.03um pore size
Ultrafiltration or membrane filtration is a water filtration technology based on membranes and pressure to separate particles in suspension and colloidal matter from water.
Nominal diameter of micropores in ultrafiltration membranes is around 0.03 μm, what provides a good balance between filtration and permeability and provides a barrier against bacteria and most virus.
Current quality standards for water supplies in drinking and industrial applications have increased the use of ultrafiltration (membrane filtration), which delivers higher filtrate quality than conventional sand, gravel and anthracite pressure filters.
Ultrafiltration is also widely used as a in integrated membrane filters as pretreatment to reverse osmosis plants, reducing the RO membrane fouling risk and before water disinfection. By physically removing bacteria and pathogens ,ultrafiltration can also reduce significantly the downstream Chlorine dosing.
The main benefits of ultrafiltration opposed to other conventional filtration technologies are:
|
Size and weight
|
Model | KH-UF-4040W-PVDF | KH-UF-6040W-PVDF |
| Module Diameter ( A, mm) | Φ90 mm | Φ160 mm | |
| Module Length ( B, mm) | 960mm | 960mm | |
| Module Length (C, mm) | 1106 mm | 1304 mm | |
| Size of Inlet/Outlet (D, mm) | DN25 | DN32 | |
| Operating Type | Outside to Inside | Outside to Inside | |
| Membrane Area | 8.0 m2 | 20 m2 | |
| Dry weight of the module | 5 Kg | 12 Kg | |
|
Parameters |
Shell material | UPVC | UPVC |
| Membrane Material | PVDF | PVDF | |
| Membrane pore size | 0.03μm | 0.03μm | |
| Inner diameter of the hollow fiber | 0.7 mm | 0.7 mm | |
| Outer diameter of the hollow fiber | 1.3mm | 1.3mm | |
| Turbidity of Permeating water | ≤ 0.2NTU | ≤ 0.2 NTU | |
|
SDI value of permeating water
|
≤ 3 | ≤ 3 | |
|
Flux rate of purified water (0.10MP,20℃) |
≥1000L/H | ≥3000L/H | |
|
Typical Process
|
Temperature Range | 5-45 ℃ | 5-45 ℃ |
| PH Value Range | 2-13 | 2-13 | |
|
Permeating Flux rate for different Water |
40 - 80 l/m2/hr | 40 -80 l/m2/hr | |
| Operating Pressure | ≤0.12 MPa | ≤0.12MPa | |
| Maximum Inlet Pressure | 0.2 MPa | 0.2MPa | |
| Backwashing flux rate |
1.5-2.0 times of Permeating Flux |
1.5-2.0 times of Permeating Flux |
|
| Backwashing times | Once per 30-120 minutes | Once per 30-120 minutes | |
| Chemical cleaning online during backwashing | Once per 7-14 days | Once per 7-14 days |
The whole installation and application process of our MBR modules are described as the following photo:
Contact Us at Any Time
