Home
>
Products
>
Hollow Fiber MBR
>
|
|
| Place of Origin | China |
| Brand Name | CNKHONG |
| Model Number | KH-MBR-18-Co-PVDF |
Domestic Wastewater Biochemical Treatment MBR Membrane with PVDF 0.05 pore size
1. MBR Introduction
1.Introduction
Membrane Bio Reactor(MBR) is a membrane seperation unit which was introduced into traditional sewage biological treatment technology of the new processing technology, membrane separation unit can replace the traditional two precipitation pool functions at the same time, with further removal of organic matter and nitrogen and phosphorus, is currently the most advanced and efficient water treatment technology.JHM - MBR is lined with enhanced hollow fiber membrane based on the development of high-end MBR membrane module.
2.Advantages
Membrane high mechanical strength, stable water quality, operation flux is big, long service life
1). JHM MBR membrane is high efficiency, especially capable in frequent disuse occasions.
2). Anti-oxidant modification on the in-let membrane surface makes it more durable in harsh environment like wastewater.
3). Fine inner diameter of the membrane fiber can ensure that sludge blocks the membrane pore the instant the fiber is broken accidentally, endowing the membrane with self-repairing function without affecting outflow water quality.
4). A longer shelf life than other manufacturers.
3. Technical Parameter of Membrane Module
| Item/Model | KH-MBR-8-CO-PVDF | KH-MBR-12-CO-PVDF | KH-MBR-15-CO-PVDF |
| Membrane Area(M2) | 8 | 12 | 15 |
| Height | 1050 mm | 1550 mm | 1550 mm |
| Width | 645 mm | 645mm | 645 mm |
| Thickness | 47 mm | 47mm | 47mm |
| Dry Weight | 6kgs | 10kgs | 15 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium hypochlorite | 500-3000ppm Sodium hypochlorite |
500-3000ppm Sodium hypochlorite |
| Item/Model | KH-MBR-25-CO-PVDF | KH-MBR-30-CO-PVDF | KH-MBR-35-CO-PVDF |
| Membrane Area(M2) | 20 | 30 | 35 |
| Height | 1550 mm | 1810 mm | 1810 mm |
| Width | 1040 mm | 1040 mm | 1250 mm |
| Thickness | 47 mm | 47mm | 35 mm |
| Dry Weight | 20 kgs | 25 kgs | 30 kgs |
| Membrane material | Reinforced PVDF | Reinforced PVDF | Reinforced PVDF |
| Micro pore size | 0.05μm | 0.05μm | 0.05μm |
| ID/OD of Membrane | 0.9/2.2mm | 0.9/2.2mm | 0.9/2.2mm |
| Suspend solid | <5mg/L | <5mg/L | <5mg/L |
| Temperature | 5-40℃ | 5-40℃ | 5-40℃ |
| PH range | 2~11 | 2~11 | 2~11 |
| Flux for waste water | 15~20 LMH | 15~20 LMH | 15~20 LMH |
| Operating Method | Sucking out 8 mins and staying 2 mins | Sucking out 8 mins and staying 2 mins |
Sucking out 8 mins and staying 2 mins |
| Cleaning Chemicals | 500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium Hypochlorite |
500-3000ppm Sodium hypochlorite |
2. Typical parameters of MBR units.
| Item/Model | KH-MBRMD-25×20 | KH-MBRMD-25×25 | KH-MBRMD-25×30 |
| Quantity of MBR modules |
20 pcs of MBR-25 modules |
25pcs MBR-25 modules |
30 pcs MBR-25 modules |
| Total Membrane Area(M2) | 500 | 625 | 750 |
| Length | 1550 mm | 1875 mm | 2200 mm |
| Width | 1255mm | 1255 mm | 1255 mm |
| Height | 2000 mm | 2000 mm | 2000 mm |
| Estimated Weight | 750 kgs | 940 kgs | 1125 kgs |
| Item/Model | KH-MBRMD-30×40 | KH-MBRMD-30×45 | KH-MBRMD-30×50 |
| Quantity of MBR modules |
40 pcs of MBR-30 modules |
45 pcs MBR-30 modules |
50 pcs MBR-30 modules |
| Total Membrane Area(M2) | 1200 | 1350 | 1500 |
| Length | 2850 mm | 3175 mm | 3500 mm |
| Width | 1255mm | 1255 mm | 1255 mm |
| Height | 2200 mm | 2200 mm | 2200 mm |
| Estimated Weight | 1680 kgs | 1800 kgs | 2000 kgs |
4.. Structure of Membrane Modules and Frames:
A. Structure of MBR Modules
B.Structure of MBR Frames
5. Product Features
1. Strong Performance of Anti-pollution
PVDF hollow fiber membrane with inner reinforced support which has excellent surface permeability due to patented nano-reinforcement technology.
2. Long Service Life
Reinforced membrane structure, whose tensile strength of membrane filter is over 400N, can resist repeated air scrubbing and chemical cleaning.
3. Unique Integrated Aerator
Patented aeration technology eliminates bottom boundary separation layer, avoids dead space of aeration, relief membrane pollution at the bottom, reduces aeration volume, and greatly improves aeration efficiency.
4. Modular Design
According to capacity, add or reduce membrane module. Easy for installation, replacement and maintenance as well as good sealing performance.
5. Stable Effluent Performance
Base on narrow pore size distribution, Suntar MBR membrane has good effluent quality, with turbidity less than 0.1 NTU.
6. Application of MBR Units:
The whole installation and application process of our MBR modules are described as the following photo:
Why Choose US?
1). Over 20 years experience in UF and MBR membrane
2). Excellent cooperation partner
3). Own an excellent technical team
4). Advanced R & D capability
5). International management system(ISO9001)
6). Located in Jiangsu, convenient for export transportation.
Our Service
1). MBR membrane technical consulting,
2). MBR membrane application engineering design,
3). MBR system manufacturing, installation and commissioning,
4). Different membrane dimension, material like PP, PVDF etc.,can be customize according to your requirements
5). 12 months warranty
Contact Us at Any Time
